Specs:

• Barrel Length: 16.12"
• Length of Pull: 12.62" - 14.12"
• Twist Rate: 1:10"
• Capacity: 17
• Overall Length: 34.37
• Weight: 6.8 lb

Features:

• Interchangeable magazine wells for use of common Ruger® and Glock® magazines. Ships with SR-Series Pistol and Security-9® magazine well installed and an additional magazine well accepting Glock® magazines is included*.
• Easy takedown enables quick separation of the barrel/forend assembly from the action for ease of transportation and storage. Takedown is as simple as locking the bolt back and verifying that the rifle is unloaded, pushing a recessed lever, twisting the subassemblies and pulling them apart.
• Reversible magazine release and reversible charging handle to support ambidextrous use or one-handed control manipulation while maintaining a proper firing grip*.
• 1/2"-28 threaded barrel with included thread protector allows for use of standard muzzle accessories.
• Accurate sighting system with adjustable ghost ring rear aperture sight and non-glare, protected blade front sight.
• Soft rubber buttpad with spacers allows the rifle to be properly sized for different shooters or varying levels of outerwear or defensive gear (three, 1/2'' spacers included).
• Light, crisp trigger pull with minimal overtravel and positive reset utilizing proven 10/22® trigger components.

* Older Glock® magazines that feature only one magazine latch slot may still be used with the PC Carbine™, but the magazine release button must remain on the left side of the rifle as shipped from the factory. The magazine release button should not be reversed when using this type of magazine as the magazine will not properly lock into the magazine well. Early versions of Glock®-brand magazines with a “U” shaped notch at the rear of the magazine feed lips will not function in the PC Carbine™

† NOTE: The receiver-mounted, Picatinny-style rail is designed to accommodate most optics and optic mounts intended for use with Picatinny/ MIL-STD 1913 rails. However, due to reduced clearance between the top of the receiver and the bottom of the optics rail, optics and optic mounts that extend more than .275" below the top of the rail may not fit the PC Carbine™. Ensure that the optic or optic mount you intend to use does not extend more than .275" below the top of the Picatinny-style rail when installed.